HPS 6061 T6 Aluminum Reducer Joiner TubeĀ is ideal for intake, cooling systems and turbo intercooler piping setup because 6061 aluminum is the most popular and versatile alloy, and is the least expensive of the heat treatable aluminum alloys. HPS aluminum round tubing joiner is sold in the T6 condition, ideal for sawing, machining, sanding, and polishing. The aluminum transition joiner tube can be polished, but due to the softness of the aluminum, care must be taken not to remove too much material, especially in the area near any welds.
Key Features
- Material: 6061-T6 Aluminum.
- Available in Step Up and Slip Fit Transition Reducer Joiners
- REMARK: Step up and Slip fit transition joiners do NOT have Bead Roll on ends
- Ideal for racing or turbocharged application.
Remark: HPS does NOT recommend 6061 Aluminum to be used for exhaust systems.
To purchase the item or review the product details, simply click on the part number listed in the table
Outside Diameter | Length | Wall Thickness | MSRP | Part Number |
---|---|---|---|---|
1-1/2" - 1-3/4" (38mm - 45mm) | 4" | 16 Gauge - 0.065" (1.65mm) | $17.00 | STEP-AT150-175 |
1-3/4" - 2" (45mm - 51mm) | 4" | 16 Gauge - 0.065" (1.65mm) | $17.00 | STEP-AT175-200 |
2" - 2-1/4" (51mm - 57mm) | 4" | 16 Gauge - 0.065" (1.65mm) | $18.00 | STEP-AT200-225 |
2" - 2-1/2" (51mm - 63mm) | 4" | 16 Gauge - 0.065" (1.65mm) | $19.00 | STEP-AT200-250 |
2-1/4" - 2-1/2" (57mm - 63mm) | 4" | 16 Gauge - 0.065" (1.65mm) | $19.00 | STEP-AT225-250 |
2-1/2" - 3" (63mm - 76mm) | 4" | 16 Gauge - 0.065" (1.65mm) | $21.00 | STEP-AT250-300 |
3" - 3-1/2" (76mm - 89mm) | 4" | 16 Gauge - 0.065" (1.65mm) | $22.00 | STEP-AT300-350 |
3-1/2" - 4" (89mm - 102mm) | 4" | 16 Gauge - 0.065" (1.65mm) | $25.00 | STEP-AT350-400 |
4" - 4-1/2" (102mm - 114mm) | 4" | 14 Gauge - 0.079" (2mm) | $30.00 | STEP-AT400-450 |
To purchase the item or review the product details, simply click on the part number listed in the table
Tubing Size | Length | Wall Thickness | MSRP | Part Number |
---|---|---|---|---|
1-1/2" OD to 1-1/2" ID | 4" | 16 Gauge - 0.065" (1.65mm) | $17.00 | SLIP-AT150 |
1-3/4" OD to 1-3/4" ID | 4" | 16 Gauge - 0.065" (1.65mm) | $18.00 | SLIP-AT175 |
2" OD to 2" ID | 4" | 16 Gauge - 0.065" (1.65mm) | $19.00 | SLIP-AT200 |
2-1/2" OD to 2-1/2" ID | 4" | 16 Gauge - 0.065" (1.65mm) | $19.00 | SLIP-AT250 |
3" OD to 3" ID | 4" | 16 Gauge - 0.065" (1.65mm) | $21.00 | SLIP-AT300 |
3-1/2" OD to 3-1/2" ID | 4" | 16 Gauge - 0.065" (1.65mm) | $22.00 | SLIP-AT350 |
4" OD to 4" ID | 7" | 16 Gauge - 0.065" (1.65mm) | $26.00 | SLIP-AT400 |
4-1/2" OD to 4-1/2" ID | 7" | 14 Gauge - 0.079" (2mm) | $30.00 | SLIP-AT450 |