HPS Stainless Steel Spring Loaded T-Bolt Clamp SAE 60 - 2.75"-3.08" (70mm-78mm) for 2.5" ID hose

The HPS Stainless Steel Spring Loaded T-Bolt Clamp SAE 60 - 2.75"-3.08" (70mm-78mm) for 2.5" ID hose is design to provide high strength and a 360? seal. The added spring is there to automatically adjusts the clamp diameter to compensate for the expansion and contraction of hose when temperatures or the pressure fluctuate. HPS spring loaded clamps are reusable. Design to meet or exceeds SAE Spec.J1508 for T-bolt clamps. The clamps has a floating bridge and rolled edges to protect soft hose. The lock nut has a nylon insert to prevent it from backing out. Tighten with a 7/16" socket wrench

The HPS constant tension t bolt clamps are widely used in the charge air cooler system (cac), aircraft, automotive, truck and heavy-duty vehicle, industrial, hardware/plumbing, and marine industries.

Technical Specification
- Superior welded construction
- Floating bridge and rolled edges to protect soft hoses
- 3/4" wide 300 Series Stainless Steel Band and Trunnion
- Zinc Plated T-bolt, Nut and Springs
- 7/16" head Nylon Nut
- Meets or exceeds SAE Spec. J1508 for T-Bolt clamps
- Max. Torque Spec: 75 in. lbs.
- SAE # 60
- Effective Diameter Range: 2.75" - 3.08" (70mm - 78mm)
- Nominal Diameter: 2-7/8"

FAQ
Question: What is the best way to determine the clamp size you'll need?

Answer:
1. If you are buying the clamps for a pipe or a hose that is NOT made by HPS, simply measure the outside diameter (O.D.) of your final hose assembly or pipe. Locate the Spring-Loaded Clamp part number with the closest nominal diameter.

2. If you are buying the clamps for our HPS silicone hoses, you can simply refer to the chat listed below. The chat shows the clamps part number that would fit on HPS Silicone Hoses with the INSIDE DIAMETER.